Themis RES-32XEL, Руководство по установке

Страница: 12 / 52

RES-32XEL Installation Guide
1-2
Themis Computer
The RES-32XEL is designed within a 3RU (5.25”) form-factor that is 20” deep and
fits into a 19” rack (with mounting brackets). I/O expansion includes one 64-bit/133-
MHz PCI-X slot, two 64-bit/100-MHz PCI-X slots (one that supports Ultra320-
SCSI RAID), two 32-bit/33-MHz PCI slots, and a single Pro8x/4x AGP graphics
slot to support a high-speed graphics card.
Figure 1-2.
RES-32XEL System Block Diagram
100 MHz
1.5V
3.3V
5V
Memory
Controller
Hub*
(MCH)
I/O
Controller
Hub 4*
(ICH4)
AGP Pro/8x
64-bit PCI-X (2)
133 MHz
Ethernet (RJ45)
3.3V
64-bit PCI-X
33 MHz
32-bit PCI (2)
Ultra320
SCSI 0/1
Gigabit LAN
Primary M/S IDE
Secondary M/S IDE
PCI-X 64-bit
Hub 2.0*
(P64H2)
USB 2.0 0/1
Super I/O
Audio Interface
(AC97)
Integrated LAN
Controller
System
Management
Bus Controller
2-Channel ECC
DDR-266/200 SDRAM
Up to a total of 12 GB
Channel A
Channel B
266/200-MHz
Memory Bus
4.27 GB/sec
266 MB/sec
Dual-Channel
Ultra ATA/100 EIDE
Controller Ports
1 GB/sec
133-MHz PCI-X Bus
100-MHz PCI-X Bus
Up to 3.06 GHz each
533/400-MHz System Bus
Bank 1
Six 184-pin DIMM Sockets
Two 604/603-pin Sockets
Bank 2
Bank 3
Bank 1
Bank 2
Bank 3
Floppy Disk-Drive
Xeon CPU 1
TM
Xeon CPU 2
TM
Note:
* Intel E7505 chipset
®
1-Mb/sec Serial Ports (2)
EPP/ECP Parallel Port
Audio Line In
USB 0
USB 1
Audio Line Out
Microphone In