background image

v

Themis Computer

RES-32DCX Installation Manual

The device may only be opened for the installation and removal of extension
(PCI) cards, memory modules, hard-disk drives, fan housings, power supplies
(RES-22 and RES-32 systems only), and the lithium battery—all in accordance
with the instructions given in this manual.

If extensions are made to the device, the legal stipulations and the device spec-
ifications must be observed.

The device must be switched off when removing the top cover; for example,
before installing extension (PCI) cards.

Operation of Laser Source Devices

DVD/CD-ROM drives contain laser light-emitting diodes (classified in accordance
with IEC 825-1:1993: LASER CLASS 1) and, therefore, must not be opened.

If the enclosure of such a drive is opened, invisible laser radiation is emitted. Do
not allow yourself to be exposed to this radiation.

The laser system meets the code of Federal Regulations 21 CFR,1040 for the USA
and Canadian Radiation Emitting Devices Act, REDR C 1370.

Electrostatic Discharge (ESD)

A sudden discharge of electrostatic electricity can destroy static-sensitive devices
or micro-circuitry. Proper packaging and grounding techniques are necessary pre-
cautions to prevent damage. Always take the following precautions:

1.

Transport boards in static-safe containers such as boxes or bags. 

2.

Keep electrostatic-sensitive parts in their containers until they arrive at static-
free stations.

3.

Always be properly grounded when touching a sensitive board, component, or
assembly.

4.

Store electrostatic-sensitive boards in protective packaging or on conductive
foam.

Содержание RES-32DCX



















































































































































Отзывы: