Themis RES-12XR3, Руководство по установке

Страница: 94 / 146

3-26
Themis Computer
RES-12XR3 Installation Manual - Configuration 7 Version 1.1
3.3.13 Set LAN Configuration
Set this feature to configure the IPMI LAN adapter with a network address as shown
in the following graphics.
Channel Number
Enter the channel number for the SET LAN Config command. This is initially set to
[1] (default). Press “+” or “-” on your keyboard to change the Channel Number.
Channel Number Status
This feature returns the channel status for the Channel Number selected above:
“Channel Number is OK” or “Wrong Channel Number”.
IP Address Source
This features allows the user to select how an IP address is assigned to a client com-
puter or network device. Select DHCP (Dynamic Host Configuration Protocol) to
allow a client (computer or device) obtains an IP address from a DHCP server that
manages a pool of IP addresses and network information on a “request and grant”
basis. Upon time-out (or lease expiration), the IP address assigned to the client can
be reassigned to a new client. Select
Static (Static Allocation) (default) to allow the
host server to allocate an IP address based on a table containing MAC Address/IP
Address pairs that are manually entered (probably by a network administrator). Only
clients with a MAC address listed in the MAC/IP Address Table will be assigned an
IP address. The IP Address allocated to the client is on a longer term basis than that
assigned by the DHCP mentioned in the other option. The options are
DHCP
(default) and Static.
IP Address
The BIOS will automatically enter the IP address of this machine; however it may be
over-ridden. IP addresses are 6 two-digit hexadecimal numbers (Base 16, 0—9, A,
B, C, D, E, F) separated by dots. (i.e., 00.30.48.D0.D4.60).
Subnet Mask
This item displays the current subnet mask setting for your IPMI connection. The
value of each three-digit number separated by dots should not exceed 255.