manualshive.com logo in svg

Themis RES-12XR3, Руководство по установке

Поделиться
Скачать
Themis RES-12XR3 Скачать руководство пользователя страница 8

vi

Themis Computer

RES-12XR3 Installation Manual - Configuration 7

Version 1.1

2.

Use anti-static mats, heel straps, or air ionizers to give added protection.

3.

Handle electrostatic-sensitive components, boards, and assemblies by the case
or the PCB edge.

4.

Avoid contact with pins, leads, or circuitry.

5.

Turn off power and input signals before inserting and removing connectors or
test equipment.

6.

Keep the work area free of non-conductive materials such as ordinary plastic as-
sembly aids and Styrofoam.

7.

Use field service tools, such as cutters, screwdrivers, and vacuums that are con-
ductive.

8.

Always place drives and boards PCB-assembly-side down on the foam. 

Instructions for the Lithium Battery

Systems are equipped with a lithium battery installed on the motherboard. To
replace this battery, please observe the instructions that are described in this man-
ual.

Warning:

There is a danger of explosion when the wrong type of battery is used

as a replacement. 

Содержание RES-12XR3



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды