Thecus N299 Скачать руководство пользователя страница 24

Страница: 24 / 94

Storage Management

The Storage Menu displays the status of storage devices installed or connected
to the N299, including disk and RAID information.

Disk Information

From the Storage menu, choose the
Disks item and the Disk
Information screen appears. From

here, you can see various items
about installed SATA hard disks.

Blank lines indicate that a SATA hard
disk is not currently installed in that

particular disk slot.

SATA Information

Item Description
Disk Slot

Indicates disk location.

Capacity (MB)

Shows the SATA hard disk capacity.

Model

Displays the SATA hard disk model name.

Firmware

Shows the SATA hard disk firmware version.

Status

Indicates the status of the disk. Can read OK, Warning, or Failed.

Total

Shows the total SATA hard disk capacity.

File System Check

Click Apply to run a file system check on installed hard disks.

Some services will scan the content directories, and this will keep the hard disk

drive from spinning down.

NOTE

RAID Information

From the Storage menu, choose the

RAID item and the RAID
Information screen appears.

RAID Information

Item Description
RAID Level

Shows the current RAID configuration.

Total Capacity

Shows total capacity of the RAID configuration.

Status

Indicates status of the RAID. Can read either Healthy or Failed.

Used Percentage

Displays percentage of used RAID capacity.

Stripe Size

Shows the current disk stripe size.

Remaining Time

Indicates time remaining until the RAID is finished building.

To configure your RAID settings, press the Config button to go to the RAID
Configuration screen.

Содержание N299































































































Результаты поиска

Содержание N299

Отзывы:

Похожие инструкции для N299

Бренды по названию

Популярные бренды

Thecus N299, Руководство пользователя

Результаты поиска

Содержание N299

Отзывы:

Похожие инструкции для N299

Бренды по названию

Популярные бренды