background image

1

theLeda S10 WH  

1020921

theLeda S10 BK  

1020922

theLeda S20 WH  

1020923

theLeda S20 BK  

1020924

theLeda S10 W WH  

1020931

theLeda S10 W BK  

1020932

theLeda S20 W WH  

1020933

theLeda S20 W BK  

1020934

LED spotlight with  

motion detector

EN

307286 01

1.  Basic safety information

Danger of death through electric shock or fire!

¾

¾

Installation should only be carried out by a 

qualified electrician!

WARNING

 

!

Only intended for installation out of arm‘s reach.

 

!

High temperature! Do not touch the 

 

metal parts of the device.

 

L

The LED spotlight with motion detector (PIR) conforms to 

EN 60598-1 and EN 60669-2-1 if correctly installed

 

L

IP 55 in accordance with EN 60529

 

L

Optional with corner angle (9070969/

9070987)

 

and distance frame (9070971/ 

9070988)

2.  Proper use

 

LED spotlight is used for lighting, depending on 

 

presence and brightness

 

Device is for wall mounting inside and outside

 

For entrances, garages, gardens, corridors, parks, etc.

 

For use in normal ambient conditions

 

L

Lamp cannot be replaced.  

Replace entire spotlight if defective! 

Disposal

¾

†

Dispose of device in environmentally sound manner

3.  Connection

Danger of death through electric shock or fire!

¾

¾

Installation should only be carried out by a 

qualified electrician!

WARNING

¾

†

Disconnect power source!

¾

†

Ensure device cannot be switched on!

¾

†

Check absence of voltage!

¾

†

Earth and bypass

¾

†

Cover or shield any adjacent live components

N

L

N

L

4.  Installation

Installation instructions

Danger of death through electric shock or fire!

¾

¾

Installation should only be carried out by a 

qualified electrician!

WARNING

 

L

Observe the recommended installation height of  

1.8 m–2.5 m!

3.5 m

1 m

3 m

10 m

1 m

3  m
10 m

3.5 m

1 m

3 m

10 m

1 m

3  m
10 m

As the LED spotlight reacts to variations in temperature, avoid 

the following situations:

 

L

Do not direct the LED spotlight at objects with highly-
reflective surfaces such as mirrors etc.

 

L

Do not install the LED spotlight near heat sources, such as 
heating outlets, air conditioning systems, lamps etc.

 

L

Do not direct the LED spotlight at objects that move in the 
wind, such as curtains, large plants etc.

 

L

Pay attention to the direction of motion during the test run

Отзывы: