Controls and menu
TC 649 E Manual
15
5.2
Settings
5.2.1
Network settings
You can change the network settings for the TC 649 E in this menu.
Please note that all changes only affect the right network interface
(Ethernet).
5.2.1.1
DHCP
static
To change the network interface from DHCP to
static
…
Untick the Use DHCP field.
Enter a valid IPv4 address, the corresponding subnet mask and a standard
gateway if applicable.
Click on
Save
to confirm changes.
To configure and use the NTP server, proceed as follows …
Tick the box next to
Use NTP server
.
Enter the relevant NTP server address.
Click on
Save
to confirm changes.
