Theben RAM 712 KNX, Руководство пользователя

Страница: 27 / 65

RAM 712 KNX
room thermostat for surface-mounted and flush-mounted installation
theben
Version: Dec-10 (subject to change) Page 27 of 65
3.4.6 Operating mode
Table 15
Designation Values Application
Objects for determining the
operating mode
Operating mode, presence,
window status
RAM 712 can switch the
operating mode depending on
the window and presence
contacts.
alt.: Comfort, night, frost Traditional setting without
window and presence status.
Operating mode after reset Frost protection
Night-time temperature
reduction
Standby
Comfort
Operating mode after start-up
or reprogramming
Type of presence sensor
(to Obj. 4)
The presence sensor activates
the comfort operating mode
Presence detector Comfort operating mode as
long as the presence object is
set.
Presence keys 1. If the operating mode
object (object 3) is
called up again after
setting the presence
object the new
operating mode will
be accepted and the
state of the presence
object ignored.
2. If the presence object
is set during night /
frost operation, it is
reset after the
configured comfort
extension finishes (see
below).
3. The presence object is
not reported on the
bus