background image

57

57

GB

8. Warranty declaration

Theben HTS presence detectors are manufactured and quality-tested with the ut-
most  care  using  state-of-the-art  technologies.  Theben  HTS  therefore  guarantees 
perfect function, provided the detectors are used as intended. However, should a de-
fect occur, Theben HTS offers the following warranty within the scope of its General 
Terms and Conditions of Business: 

Please bear in mind the following points:

 

● The warranty period is 24 months, commencing from the manufacturing date.

 

● The warranty becomes null and void if you or third parties undertake alterations to 

the units. 

 

● If the presence detector is connected to a software-controlled system, the war-

ranty for this connection is only valid provided the stated interface specification is 
adhered to.

We undertake to repair or replace as quickly as possible all supplied components which 
have become defective or unusable as a result of demonstrably bad material, faulty 
design or defective workmanship up to the expiry of the warranty period.

Returns

In the event of a warranty claim please send the unit together with the delivery note and 
a brief description of the fault to the dealer concerned.

Industrial property rights

The concept including hardware and software of these units is protected by copyright.

Содержание ECO-IR 180EIB-AC





















Отзывы: