4.0 Programming
4.1 Basic program
Time controlled thermostat
RAM 797 B
features
a basic program that permanently remains in the
memory. This basic program heats the living room
as of 6.00 o’clock to 21° C and as of 22.00 the
night program lowers the temperature to 16° C.
After the basic program is deleted and no new
program is entered, the temperature will be
con-
stantly
regulated at + 6° C.
The display shows the symbol .
4.3 Deleting the basic program
If you did not chose the summer/winter changeo-
ver during initial setup, you can add this at a later
date.
Setting:
Pres buttons and simultaneously. With
button chose the desired summer/winter
changeover switching group (see 3.0). Save by
pressing button .
Confirm the displayed date with button . If
needed, change date with buttons or .
Save with button .
3.2 Setting the summer/winter change-
over during automatic mode
+
+
Prog
Prog
+
–
Prog
3.3 Setting without automatic summer /
winter changeover
After RESET with button choose no changing
mode (display „no“), then save with button
. To set the time see instructions above
under programming point* 3.1.
Prog
–
34
4.2 Display Basic programm
Prog
+
-
Prog
+
-
Prog
set hour
set minutes
f.ex. 2001
