Connecting TC 649 C to the network
TC 649 C manual
13
3.3
Start-up via the service interface in order to assign the IP address
statically
You will need two network cables (RJ45 connector) for this type of start-up.
1.
Disconnect the TC 649 C from the power supply.
2.
Plug network cable 1 into the router.
3.
Plug the other end of network cable 1 into the (right-hand)
Ethernet
socket
on the TC 649 C.
4.
Plug network cable 2 into the network socket on your PC.
5.
Plug the other end of network cable 2 into the (left-hand)
Service
socket on
the TC 649 C.
6.
Connect the TC 649 C to the power supply.
7.
Open the web browser (Google Chrome).
8.
Open the web browser and open the following page in the address field:
9.
10.
The login screen will appear.
11.
Enter
admin
as the user name.
Enter
admin
as the password.
Click on
"Log in".
12.
Display the IP address of your TC 649 C via Settings
Network settings
IP address.
13.
Untick "Use DHCP", use the pre-filled IP address or enter an IP address of
your choice.
