PlanoSpot 360 DALI-2 S DE manual
8
4.4
Detection area
The square detection area of the PlanoSpot 360 DALI-2 S presence sensor
guarantees accurate
and simple planning. There are 2 detection zones available.
Note that seated and walking persons are detected in differently sized areas.
The recommended installation height is 2–3 m.
As installation height increases, the sensitivity
of the PlanoSpot 360 DALI-2 S decreases. At an
installation height of 3 m or higher, walking
motions are necessary and the detection areas
of several PlanoSpot 360 DALI-2 S devices
should overlap in the marginal zones. The
detection range reduces as the temperature
increases, and the sensitivity can be adjusted in
5 increments via the DALI bus or with the
theSenda B/app remote control.
Seated persons
The PlanoSpot 360 DALI-2 S reacts very
sensitively to the slightest movements.
The
details refer to very slight movements at table
height (approx. 0.8 m).
Walking persons
From an installation height of > 3 m, the size of
and distance between the active and passive
zones increase. More pronounced movements
are required for clear detection.
Standard detection zone
Installation
height (A)
Transverse (t)
Seated (s)
2.0 m
20 m
2
4.5 m x 4.5 m
9 m
2
3.0 m x 3.0 m
2.5 m
36 m
2
6.0 m x 6.0 m
16 m
2
4.0 m x 4.0 m
3.0 m
49 m
2
7.0 m x 7.0 m
20 m
2
4.5 m x 4.5 m
3.5 m
64 m
2
8.0 m x 8.0 m
–
–
Reduced detection zone
Installation
height (A)
Transverse (t)
Seated (s)
2.0 m
4 m
2
2.1 m x 2.1 m
4 m
2
2.0 m x 2.0 m
2.5 m
9 m
2
3.0 m x 3.0 m
6 m
2
2.5 m x 2.5 m
3.0 m
14 m
2
3.8 m x 3.8 m
9 m
2
3.0 m x 3.0 m
3.5 m
22 m
2
4.7 m x 4.7 m
–
–
Detection areas according to sensNORM, see data sheet
By tilting the optics manually, the detection area can be shifted towards the window or the
interior by 0.5 to 1 m, depending on the installation height.
