Theatrelight Nova 24 Скачать руководство пользователя страница 41

Страница: 41 / 63

36 NOVA OPERATION

BASS STEP SLOW

If the Bass mode LED is On (Bass Slow), each bass beat of the music

steps the Chase

to the next step. The Up and Down fade

time of each step can be changed by moving the Speed Master within the range of

10 seconds up to 114 BPM

(a fade time of

nearly half a second). Chase direction is automatically reversed every 8 music beats.

Snap

Up fade times are instant (up=0). Down fade times are the same as the Speed Master setting (dn=t).

Fade

Up fade times are the same as the speed setting (up=t). Down fade times are twice the speed setting (dn=2t).

Comet

Up fade times are the same as the speed setting (up=t). Down fade times are four times the speed setting (dn=4t). Note

that if the Speed Master is set to longer than<N>4 seconds the Comet Down fade time reverts to the same time as the
Speed Master (dn=t).

BASS STEP FAST

If the Bass mode LED is Flashing (Bass Fast), each bass beat of the music

steps the Chase

to the next step. The Up and Down

fade time of each step can be changed by moving the Speed Master within the range of

10 seconds to 114 BPM

(a fade time of

nearly half a second). Chase direction is automatically reversed every 8 music beats.

Snap

Up and Down fade times are instant (up=0, dn=0).

Fade

Up fade times are half the Speed Master setting (dn=t/2). Down fade times are the same as the speed setting (dn=t).

Comet

Up fade times are instant (up=0). Down fade times are twice the speed setting (dn=2t). Note that if the Speed Master is

set to longer than<N>4 seconds the Comet Down fade time reverts to the same time as the Speed Master (dn=t).

BASS SPEED SLOW

If the Bass mode LED is On (Bass Slow), each bass beat of the music

speeds up the Chase

within the range

10 secs

per step

up to 120 BPM. Depending on the setting of the Fade Master, the Up and Down fade time of each step is changed to match the
speed of the Chase. Chase direction is automatically reversed every 8 music beats.

Snap

Up fade times are instant (up=0). Down fade times are the same as the Speed Master setting (dn=t).

Fade

Up fade times are the same as the speed setting (up=t). Down fade times are twice the speed setting (dn=2t).

Comet

Up fade times are the same as the speed setting (up=t). Down fade times are four times the speed setting (dn=4t).

Содержание Nova 24
































































Результаты поиска

Содержание Nova 24

Отзывы:

Похожие инструкции для Nova 24

Бренды по названию

Популярные бренды

Theatrelight Nova 24, Руководство по эксплуатации

Результаты поиска

Содержание Nova 24

Отзывы:

Похожие инструкции для Nova 24

Бренды по названию

Популярные бренды