GETTING STARTED WITH
THE THINGS UNO
For full installation & setup please visit
https://ttn.fyi/activate.
1. Use a micro USB cable to connect the Things UNO
to an USB port of your computer.
2. Continue with the steps as described in the
illustrated quick start guide for The Things UNO
found on https://ttn.fyi/activate.
INSTRUCTIONS FOR SAFE USE
The Things UNO shall only be powered by 5V micro
USB or a 7-9V DC power adapter with a 2.1mm jack
plug.
The connection of incompatible devices to the Things
UNO (f.e. via the micro USB connector) may affect
compliance or result in damage to the unit and
invalidate the warranty.
Use a 915 MHz / 868 MHz tuned, 50 Ohm
impedance antenna for use with the optional SMA
connector.
The Things UNO has one of the following modules on
board with the following frequency and output
power;invalidate the warranty.
The Things Node has one of the following modules on
board with the following frequency and output
power;
For installation & set up please visit
https://ttn.fyi/activate
EN
Frequency
Range
LoRaWAN
915 MHz
Maximum TX
Range
27 dBm
902 to 928 MHz
