Quick
Start
:
FLIR E75/E85/E95
© 2018 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT 05641 / 800.636.9820
1
1.
MEMORY:
Insert SD memory card into the slot under the rubber cover on the top of the camera.
2.
POWER:
Insert a fully charged battery into the base of the hand grip. The battery life is indicated in the upper
right corner of the LCD display.
3.
START:
Press the Power button until you hear an audible tone signaling camera startup.
•
Swing the attached lens cover up and lock in the open position on the top of the camera.
•
The LCD display will turn on and you will see the default start up screen (as above) showing a live infrared
image.
•
To turn the camera off, press the Power button until an audible tone signals it is powering down.
4.
FOCUS:
Focus is either manual or automatic, each mode is user selectable.
•
To manually focus, adjust the focusing ring either clockwise or counter clockwise to optimize image focus.
•
When autofocusing, the imager can utilize one of the following methods. The focus method is configured in the
Settings
menu. Select
Settings
>
Device Settings
>
Focus
>
Autofocus
then select either
Contrast
or
Laser
•
Contrast; focus is based on maximizing the image contrast
•
Laser autofocus; the focus is based on a laser distance measurement. When Laser is selected, the
•
AUTO ADJUST (Level and Span):
Auto mode is selectable in
Live Mode
by clicking on the Temperature
scale icon, then
A.
•
MANUAL ADJUST (Level & Span):
Manual mode is selectable in
Live Mode
by clicking on the
Temperature scale icon, then
M.
Note:
In
Preview
or
Edit
mode, Manual adjust is active.
IR Camera Lens
Navigation
Pad
Battery Life
Indicator
Memory Card Slot and USB
IR Focusing Ring
Autofocus button
Mic for voice
annotation
Power Button
Touch-screen
LCD
Laser Distance
Meter
Trigger
Digital Camera
