STEP 9
Slide the Wheel Assembly (5) onto the axle.
Secure using a Wheel Washer (17) and a Wheel Nut (24) on to the axle. The nuts are supplied with nylon lock,
which may prove difficult to tighten the nut initially.
Do not over tighten; this may cause the wheel to not rotate. Repeat with the remaining wheels.
STEP 10
Turn the Trolley over onto its wheels (DO NOT try and lift on your own, ask for assistance!)
STEP 11
Attach the two Side (2), Front (3) & Rear (4) Panels to the Bed (1), using the R-Clip (20) (Two for each Panel).