The 37Company Fluido Compact, Руководство пользователя и техническое руководство, Страница: 19 / 52

User Manual / Technical Manual - Description
19 of 49
3.6.3 Overtemperature indicator
Perform the following steps when the overtemperature indicator LED is active (continuously
yellow).
• Check the disposable cassette for air or air bubbles. If air or air bubbles are present, prime the
set again (see
Prime the standard set
on page 25).
• Check if the warming surface of the warming module is wet or contaminated. If wet or
contaminated, clean and dry the surface (see
Cleaning
on page 30).
• Reset the device: Disconnect the power supply cord, wait a few seconds and reconnect the
power supply cord.
If the problem persists, the system needs to be replaced.
In case of overtemperature, both the repair required and overtemperature LED indicators
are active (continuously yellow). When the system is warming, an audible alarm (repeating
beep) is also active.