manualshive.com logo in svg

Thales Z-Max, Руководство по эксплуатации и применению

Magellan Z-Max - ваш надежный путеводитель в путешествиях! Получите инструкцию по эксплуатации "Getting Started" для вашего устройства совершенно бесплатно. Скачайте ее с manualshive.com. Начните пользоваться всеми возможностями продукта уже сегодня!

Поделиться
Скачать
background image

System Components

177

System Guide to R

T

K Surveying

offers a wide range of functionality for performing RTK applications including 
topography, stakeout, boundary and as-built surveys. FAST Survey is also a full 
functioned total station controller including COGO, graphical displays of points 
and locations. FAST Survey also has the ability to monitor data quality storage 
and coordinate system management. The software guides you through all steps 
required to configure and execute an RTK survey with an interface that is 
straightforward and easy to master.

Office Software 

Although RTK surveys yield precision results in real-time, office software can still play 
a key roll in the preparation and finalization of survey jobs. GPS surveying typically 
requires office software to perform preparation tasks, including site reconnaissance, 
observation session planning and feature definition. Defining the attributes of real-
time data is a critical function of field work. Feature codes or feature libraries are often 
created beforehand in an office environment. Office software also facilitates smooth 
RTK preparation by enabling file transfers between the PC and the handheld device. 
Office software can also play a pivotal role after RTK data is collected and returned 
from the field. Office software is useful for preparing GPS stakeout files and then for 
QA analysis of the collected data. Depending on the sophistication of the package, 
office software can generate graphical mapping products, text reports and export data 
into a format that assists integration into other systems. In some cases, GPS 
measurements collected in post-processed mode are used in conjunction with RTK. 

Thales Navigation GNSS Studio 

The standard office software package for the Z-Max system is Thales 
Navigation's GNSS Studio. GNSS Studio includes all functionality required to 
support processing, manipulation and output of data collected using the Z-Max 
RTK and post-processed surveying system. Using GNSS Studio, you can plan 
field operations, prepare feature codes or stakeout files prior to the field work, 
transfer data between the office computer and field devices, process collected 
data, and create your choice of detail-rich maps and reports. This is all 
accomplished through a user interface which is a mix of simplicity and power.
In addition to data transfers between devices using a cable, the software contains 
the functionality to download data using the Bluetooth wireless module in the Z-
Max GPS Receiver Module, so data can be downloaded without cables. 

This concludes the description of individual hardware and software modules which 
make up the Z-Max System for RTK surveys. Next, we will examine how the individual 
Z-Max hardware and software modules fit together to build a powerful system for real-
time navigation and data collection. 

G3.book  Page 177  Saturday, May 24, 2003  12:52 PM

Содержание Z-Max



















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Z-Max

RallyTrack SPOT Quick Start Manual preview
SPOT
Бренд: RallyTrack Страницы: 3
Rand McNally TripMaker RVND 5510 Quick Start Manual preview
TripMaker RVND 5510
Бренд: Rand McNally Страницы: 21
RAK 7205 Installation Manual preview
7205
Бренд: RAK Страницы: 10
Garmin GPS II+ Owner'S Manual & Reference preview
GPS II+
Бренд: Garmin Страницы: 112
Simrad ce32 mkii User Manual preview
ce32 mkii
Бренд: Simrad Страницы: 130
Integrated M2M Technologies iLocate GPS AutoTracker AT850218 User Manual preview
iLocate GPS AutoTracker AT850218
Бренд: Integrated M2M Technologies Страницы: 6
ALASKA APT-14 User Manual preview
APT-14
Бренд: ALASKA Страницы: 29
FALK FLEX Quick Start Manual preview
FLEX
Бренд: FALK Страницы: 5
Heathkit IT-12 Assembly Manual preview
IT-12
Бренд: Heathkit Страницы: 30
II Morrow Inc. Apollo GX 50 User Manual preview
Apollo GX 50
Бренд: II Morrow Inc. Страницы: 38
Spytec GPS Spytec GPS User Manual preview
Spytec GPS
Бренд: Spytec GPS Страницы: 3
Rosler EQTrace TD Quick Manual preview
EQTrace TD
Бренд: Rosler Страницы: 19
Skyway GM-4300 Navi User Manual preview
GM-4300 Navi
Бренд: Skyway Страницы: 31
GUARD1 Duress Device User Manual preview
Duress Device
Бренд: GUARD1 Страницы: 5
TomTom GO 740 LIVE Brochure & Specs preview
GO 740 LIVE
Бренд: TomTom Страницы: 2
GB Instruments LAN-Tracker GET-4220K Instruction Manual preview
LAN-Tracker GET-4220K
Бренд: GB Instruments Страницы: 30
ADB Safegate FCU-1-in-1 User Manual preview
FCU-1-in-1
Бренд: ADB Safegate Страницы: 110
Voxson Voxtrack 500 Software Manual preview
Voxtrack 500
Бренд: Voxson Страницы: 59

Бренды по названию

Популярные бренды

Загрузить еще бренды