manualshive.com logo in svg

Thales Z-Max, Руководство по эксплуатации и применению

Magellan Z-Max - ваш надежный путеводитель в путешествиях! Получите инструкцию по эксплуатации "Getting Started" для вашего устройства совершенно бесплатно. Скачайте ее с manualshive.com. Начните пользоваться всеми возможностями продукта уже сегодня!

Поделиться
Скачать
background image

156

Z-Max Surveying System Operation and Applications Manual

GPS receiver are processed by the rover receiver and the centimeter-level vector 
between the base and rover receivers is computed. Finally, the rover receiver 
computes the rover position using the known base position, the computed vector and 
station antenna heights. This is the basic function of the rover receiver in an RTK 
system. 

With the base and rover functioning as described above, a user carrying the rover 
system can move about a project site and position features of interest quickly and 
accurately. Positions are computed immediately, giving the user confidence that all is 
functioning properly. And since the base system does not discriminate to whom it 
transmits its raw data, there is no limit to the number of rover system that can operate 
off of one base station. 

Applications 

RTK Surveying is appropriate for any application that requires both high precision and 
high productivity. Applications such as topography, construction, control point 
densification, GIS data collection, oil exploration and mining are just a few of the 
many applications that are good uses of RTK surveying technology. Compared to a 
conventional total station, an RTK system will be vastly more productive in these 
types of surveys and have the added benefit that an RTK system can be operated by 
only one person. 

There are two primary survey tasks for which RTK systems are used. One method is 
the precise positioning of features that already exist (topography, mapping, as-built 
surveys). Another powerful application of RTK is navigating to features with known 
coordinates. This is done when recovering boundary control or while transferring a 
design features that exist electronically to real stakes in the ground (construction 
stakeout). 

In feature acquisition, the rover system moves around the project area positioning 
and assigning attributes to features of interest. Features of any type can be 
positioned, such as the centerline of a road, the perimeter of a pond, light poles or 
corners of buildings. This capability makes GPS RTK a great tool for mapping 
applications, such as topographic and planimetric surveys and as-built surveys. RTK 
systems are also very efficient for mapping stockpiles and gravel pits for volume 
computations. 

Feature stakeout is a task that can only be accomplished with GPS operating in RTK 
mode. Stakeout of a feature involves navigating to a point or series of points that 
define the location of a feature. Given the coordinates of a point from another source 
such as an aerial photograph or a to-reach description, you are able to find the exact 
location on the ground that corresponds to those coordinates. Conventionally, this is 

G3.book  Page 156  Saturday, May 24, 2003  12:52 PM

Содержание Z-Max



















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Z-Max

Dash Express Getting Started Manual preview
Express
Бренд: Dash Страницы: 55
Navigon 23 Series Quick Installation Manual preview
23 Series
Бренд: Navigon Страницы: 2
Garmin nuvi 1260T Product Information preview
nuvi 1260T
Бренд: Garmin Страницы: 36
JRC DGPS 212 Brochure preview
DGPS 212
Бренд: JRC Страницы: 2
Blow 78-641 User Manual preview
78-641
Бренд: Blow Страницы: 20
Queclink GV75MG User Manual preview
GV75MG
Бренд: Queclink Страницы: 16
Navico MX420 Operator'S Manual preview
MX420
Бренд: Navico Страницы: 236
RTK RoyalTek BV-3200 User Manual preview
RoyalTek BV-3200
Бренд: RTK Страницы: 34
DeLorme GPS2058 User Manual preview
GPS2058
Бренд: DeLorme Страницы: 11
Enfora GSM2218 User Manual preview
GSM2218
Бренд: Enfora Страницы: 27
ANTZER TECH CO RIFA-M User Manual preview
RIFA-M
Бренд: ANTZER TECH CO Страницы: 50
Laird 450-00059B User Manual preview
450-00059B
Бренд: Laird Страницы: 19
Garmin GNC 420W Quick Reference preview
GNC 420W
Бренд: Garmin Страницы: 22
Lowrance LCX-15 MT Installation And Operation Instructions Manual preview
LCX-15 MT
Бренд: Lowrance Страницы: 76
Scorpio RIDE CORE User Manual preview
RIDE CORE
Бренд: Scorpio Страницы: 18
FALCOM FSA03 Getting Started preview
FSA03
Бренд: FALCOM Страницы: 13
FALCOM MAMBO2 Hardware Manual preview
MAMBO2
Бренд: FALCOM Страницы: 23
Macrom M-DVD6000L User Manual preview
M-DVD6000L
Бренд: Macrom Страницы: 26

Бренды по названию

Популярные бренды

Загрузить еще бренды