2-3
User Manual PN 84481 Rev 1
INITIAL SET-UP
NOTE
The following instructions assumes that the TU / BDU is
powered ON.
Installing the SureLINK Handset
1.
The installation of the SureLINK Handset is simply a matter of connecting the provided
Ethernet 6-inch male to male Ethernet connector between the female Ethernet connector
at the end of the coil cord and any one of the Ethernet/LAN connectors on the Terminal
(TU) / Below Deck Unit (BDU).
Figure 2-2 Ethernet Cable Connection to Handset
2.
Once the SureLINK Handset is plugged in, the screen will power up. This may take a
minute or so. The Handset is now ready to use.
NOTE
The Handset has been preconfigured to operate on extension
1002, which corresponds to the second Iridium phone line.
Содержание SureLINK
Страница 29: ...4 2 User Manual PN 84481 Rev 1 THIS PAGE INTENTIONALLY LEFT BLANK ...
Страница 32: ......