Thales SafeNet KeySecure k470, Руководство по установке

Страница: 3 / 29

Overview
The SafeNet KeySecure k470 Appliance incorporates the new SafeNet NextGen KeySecure Architecture. This
document describes how to install the k470 Appliance, from verifying your shipment to product activation and
licensing.
To ensure a successful installation of the appliance, perform the following procedures in the order indicated
here:
1. Before unpacking your new hardware, refer to "Verifying the Integrity of Your Shipment" on the next page
for safe unpacking instructions.
2. Ensure that you have all of the required components, as listed in "Received Items" on page 5
3. If you plan to mount the hardware in an equipment rack, follow the instructions in "Rack-Mounting" on
page 11 .
4. Connect the appliance to your network and log in as described in "Connecting to the Appliance" on page 18
5. Activate your appliance as described in "Activating the Appliance" on page 24 .,
6. For maximum physical access security, install the Locking Bezel as described in "Installing the Locking
Bezel" on page 23 .
7. And finally, the NextGen KeySecure requires a valid license to create and manage keys. Review the
licensing requirements in section
"Licensing" on page 26
KeySecure k470 Appliance : Installation Guide
16 June 2020, Copyright © 2020 Thales Group. All rights reserved.
3