The serial port uses a configuration equivalent to the Cisco Terminal Console. The Prolific Technologies
Inc. RJ45-to-USB serial adapter cable uses a standard RJ45 pinout configuration:
5.
When the connection is made, IP address information appears together with the appliance log in prompt:
keysecure login:
.
NOTE
You may need to press
ENTER
several times to initiate the session.
NOTE
Windows 10 occasionally crashes when trying to detect a serial port. This is a
known issue with the Windows 10 PL2303 drivers. If you experience trouble opening a
serial connection using Windows 10, use another supported operating system.
6.
As the System Administrator, enter "ksadmin" to log in and follow the prompts to create a secure password.
CAUTION!
Be sure to retain this password - it will be required to access the system in
case of network connectivity problems.
The system starts up, which can take several minutes.
Connecting to the GUI
The appliance requires a console password to be created before the system will start up.
1.
Login to the console as the System Administrator 'ksadmin' user and create a secure password.
NOTE
Be sure to retain this password - it will be required to access the system in case of
network connectivity problems.
The system starts up, which can take several minutes.
KeySecure k470 Appliance : Installation Guide
16 June 2020, Copyright © 2020 Thales Group. All rights reserved.
20
