![Thales ProtectToolkit 5.9.1 Скачать руководство пользователя страница 32](http://html1.mh-extra.com/html/thales/protecttoolkit-5-9-1/protecttoolkit-5-9-1_installation-and-configuration-manual_1099198032.webp)
Chapter 2: ProtectServer External 2 Installation and Configuration
Gathering Appliance Network Information
Before you begin, obtain the following information (see your network administrator for most of these items):
HSM Appliance Network Parameters
>
IP address and subnet mask for each LAN port you want to use (if you are using static IP addressing)
>
Hostname for the HSM appliance (registered with network DNS)
>
Domain name (per port)
>
Default gateway IP address (per port)
>
DNS Name Server IP address(es) (per port)
>
Search Domain name(s) (per port)
>
Device subnet mask (per port)
DNS Entries
>
Ensure that you have configured your DNS Server(s) with the correct entries for the appliance and the
client.
>
If you are using DHCP, then all references to the client and the HSM appliance (as in certificates) should use
hostnames.
Configuring the Network Parameters
You can use the serial connection to configure all of your network parameters, or configure a single port and
use it to access the appliance over the network and complete the configuration.
NOTE
Use a locally-connected serial terminal when changing the appliance IP address, to
avoid SSH admin console disconnection.
To configure the appliance and port network parameters
It is recommended that you configure and test each device. You need to know the IP address of at least one
network interface to establish an SSH connection to the appliance.
1.
Login to the appliance as
admin
or
pseoperator
.
2.
Configure the IP address, network mask, and gateway (optional) on at least one of the Ethernet LAN ports
(eth0 or eth1). You can specify a static address, or retrieve one from a DHCP server. You can configure
each port to use an IPv4 or IPv6 address.
NOTE
IPv6 addresses must be configured as static addresses.
Static
psesh:>
network interface static -device
<netdevice>
-ip
<IP_address>
-netmask
<netmask> [
-
gateway
<IP_address>]
DHCP
psesh:>
network interface dhcp -device
<netdevice>
Thales ProtectServer HSM 5.9.1 ProtectServer HSM and ProtectToolkit Installation and Configuration Guide
2021-11-02 08:51:40-04:00 Copyright 2009-2021 Thales Group
32