©Copyright Task Force Tips LLC 2021
23
LIY-350 January 13, 2021 Rev00
8.3 TROUBLESHOOTING
Table 8.3
8.4 REPAIR
Factory service is available with repair time seldom exceeding one day in our facility. Factory serviced equipment is repaired by
experienced technicians, wet tested to original specifications, and promptly returned. Any returns should include a note as to the nature
of the problem and whom to reach in case of questions.
Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability for
damage to equipment or injury to personnel that is a result of user service. Contact the factory or visit the web site at tft.com for parts
lists, exploded views, test procedures and troubleshooting guides.
Performance tests shall be conducted on the equipment after a repair, or anytime a problem is reported to verify operation in accordance
with TFT test procedures. Consult factory for the procedure that corresponds to the model and serial number of the equipment. Any
equipment which fails the related test criteria should be removed from service immediately. Troubleshooting guides are available with
each test procedure or equipment can be returned to the factory for service and testing.
9.0 EXPLODED VIEWS AND PARTS LISTS
Exploded views and parts lists are available at tft.com/serial-number.
SYMPTOM
POSSIBLE CAUSE
REMEDY
Leaks
Debris or damage in the seal area
Clean out debris or replace damaged parts
Elevation Binding
Debris or damage to the elevation drive parts
Clean out debris or replace damaged parts
Lack of lubricant
Horizontal Rotation Binding
Debris or damage to the horizontal drive parts
Clean out debris or replace damaged parts
Lack of lubricant
CAUTION
Any alterations to the product or its markings could diminish safety and constitutes a misuse of
this product.
NOTICE
All replacement parts must be obtained from the manufacturer to assure proper operation of the
device.
