Pagina 4 di 35
AD1100TE-STD.EN-00 - Subject to change without notice
TFT DryAir
General information governance and security concepts
Anyone who uses the dehumidifier AD must have at his/her disposal this technical manual and know
the security concepts written in this book.
All the information described in this manual are only suggestions for the optimum use; they don’t
intended to replace personal responsibility and/or local safety regulations.
Maintenance and malfunction must be performed only by authorized personnel.
The installation of the controller and its electrical connection describe in the following, must be
carried out by authorized personnel only. Repairs must be done by authorized personnel only.
This dehumidifier must not be installed in explosion-endangered areas.
The unit must not be immersed in water or constantly exposed to water spray.
Do not insert anything such as fingers or branches into the air vents.
The power supply is constantly present in the switch for the unit.
Turn off input power before opening any panel of the dehumidifier.
Allow the unit to cool down before maintenance work (at least 15 minutes after turning off).
After power failure or mains disconnection, an automatic restart of the machine may take place
after voltage return. So, turn off and padlocked always switch power OFF before any maintenance
work.
The panels of the dehumidifier must be removed only to perform maintenance.
The dehumidifier can be installed only to dehumidify air at atmospheric pressure.
Do not operate the unit without filters or when the filters are soiled.
Never remove the labels or allow them to become obscure.
Read this information and keep this manual accessible in the immediate vicinity of the dehumidifier.
The monitoring operations and maintenance must be performed in strict accordance with the
instructions.
Not attempt to repair or maintain the dehumidifier and always contact TFT for any repairs or
maintenance.
Do not modify the unit without written authorization of TFT.
During operation or other interventions on the machine, users have the responsibility to asses: the
safety of everyone involved, the safety of the unit and other assets, the protection of the
environment.
