– 30 –
– 31 –
Wireless Thermometer
6. Operation
6.1 Manual settings
• Press and hold the
SET/MAX/MIN
button for three
seconds to enter the setting mode.
• The first adjustable value flashes on the display.
• Use the
+/CHANNEL
button to make the desired set-
ting.
• Confirm with the
SET/MAX/MIN
button and go to the
next setting.
• The sequence is shown as follows:
– DCF reception ON/OFF (default: DCF ON)
– Time zone -12/+12 (default: DCF 00H)
– Hours, minutes
– Year, month, day
– Automatic reset of the maximum and minimum
values ON/OFF (default: AUTO OFF MAX MIN)
• Press and hold the
+/CHANNEL
button in the respec-
tive setting mode for quick setting. The device will
automatically quit the setting mode if no button is
pressed for 20 seconds.
6.1.1 DCF reception
• By default, the DCF reception is activated (DCF ON)
and after successful reception of the DCF signal no
manual time setting is necessary.
• Once the DCF time reception is deactivated (DCF OFF),
the clock and date must be manually set. No time zone
will appear.
• If the DCF reception is activated, the manually set time
will be overwritten by the DCF time when the signal is
received successfully.
6.1.2 Time zone setting
• In the setting mode you can make the time zone
correction.
• The time zone correction is needed for countries where
the DCF signal can be received but the time zone is dif-
ferent from the DCF time (e.g. +1=one hour plus).
6.1.3 Automatic reset of the maximum and minimum
values
• In the setting mode you can activate (AUTO ON) or
deactivate (AUTO OFF) the automatic reset of the
maximum and minimum values.
Wireless Thermometer
• If the automatic reset is activated, AUTO appears on
the display besides the current time display.
• All maximum and minimum values will be reset auto-
matically every midnight at 0:00.
6.2 Maximum/Minimum function
6.2.1 Indication of maximum and minimum values
• Press several times the
SET/MAX/MIN
button in nor-
mal mode.
• You can now see the highest (MAX) and lowest values
(MIN) since the last reset with time and date of
recording.
• The sequence is shown as follows: indoor tempera-
ture (MAX), indoor temperature (MIN), outdoor tem-
perature (MAX), outdoor temperature (MIN).
• Press the
SET/MAX/MIN
button again to return to nor-
mal mode.
• The device will automatically quit the MAX/MIN mode
if no button is pressed.
6.2.2 Reset of maximum and minimum values
a) Manual reset
• Press and hold the
SET/MAX/MIN
button while the
highest or lowest values are displayed. The values will
be deleted individually and reset to the current state.
b) Automatic reset
• Provided that in the setting mode the automatic reset
is activated (AUTO ON). The AUTO symbol appears on
the display.
• All maximum and minimum values will be reset auto-
matically every midnight at 0:00.
• An interim manual reset is still possible.
7. Installation
• When placed outdoors, choose a shady and dry place
for the transmitter. Direct sunlight may trigger incor-
rect measurement and continuous humidity damages
the electronic components needlessly.
• Before the final installation, make sure that the meas-
ured values are transmitted from the transmitter at the
desired installation site to the base station.
• Do not use the base station in the vicinity of radiators,
other sources of heat or in direct sunlight.
TFA_No. 30.3072_Amaz_Anleitung 20.04.2022 15:31 Uhr Seite 16
