RK6040 60-ton Crimping Tool
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
Description
The Greenlee Utility 60-ton, Single-acting, Die-type
Crimping Tool is intended to crimp sleeves and lugs
using industry standard dies. The single-acting ram
requires hydraulic pressure to advance, and uses an
internal spring to return.
This crimping tool requires an external 700 bar
(10,000 psi) hydraulic power source, such as Greenlee
975, 976-22, 980 and 980-22. It may also be powered
using a hydraulic intensifier capable of developing
700 bar (10,000 psi), such as the Greenlee Utility
Dynapress
®
.
Optional accessories include the following hydraulic
hoses with one male and one female coupler:
50058509
3 m (10') Conductive
•
50058517
3 m (10') Non-Conductive
•
50058522
7.6 m (25') Non-Conductive
•
Safety
Safety is essential in the use and maintenance of
Greenlee Utility tools and equipment. This manual and
any markings on the tool provide information for avoid-
ing hazards and unsafe practices related to the use of
this tool. Observe all of the safety information provided.
Purpose of this Manual
This instruction manual is intended to familiarize
operators and maintenance personnel with the safe
operation and maintenance procedures for the Greenlee
Utility 60-ton, Single-acting, Die-type Crimping Tool.
This manual should be kept available to all operating
and maintenance personnel.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Dynapress is a registered trademark of Greenlee Textron Inc.
KEEP THIS MANUAL
Table of Contents
Description .................................................................... 2
Safety ........................................................................... 2
Purpose of this Manual ................................................ 2
Important Safety Information ....................................3–4
Identification ................................................................. 5
Specifications ............................................................... 5
Setup ............................................................................ 6
Operation ...................................................................... 7
Maintenance ................................................................. 7
Periodic Relief Valve Check .......................................... 7
Illustration and Parts List ...........................................8–9
