Textron 73-70920, Руководство владельца/оператора и иллюстрированный перечень запчастей

Страница: 7 / 22

5
TRENCHER
INSTALLATION
MOUNTING INSTRUCTIONS
The trencher should be used only on Steiner
4-wheel drive power units equipped with
hydraulic auxiliary couplers.
To mount the trencher do the following steps:
1. Open quick hitch latches. Drive tractor into
position, aligning the quick hitch. Be sure that
both latches are fully engaged and locked.
2. Stop engine to install drive belt. See power unit
operator’s manual for drive belt installation and
tension adjustment.
3. Remove clip pin from support stand and raise
stand to transport position. Secure stand with
clip pin.
4. Connect hydraulic hoses to the auxiliary
couplers. If auxiliary hydraulic lever seems to
operate in the wrong direction, connect the
hoses in the opposite couplers.
UNMOUNTING INSTRUCTIONS
1. Choose a level site to remove the trencher.
2. Lower the support stand and secure with clip
pin.
3. Lower the front lift. Lower the boom and apply
slight down pressure.
4. Set parking brake and stop engine.
5. Disconnect hoses from the quick couplers.
6. Remove drive belt.
7. Open quick hitch latches. Start engine and
back power unit away from the trencher.