CD397-Oper
Safety - 1 - 5
June 2019 (Rev C)
Safety
Mobile Belt Loader Model 660-28
Section 1
Operation Manual
Table
Safety-1-3:
Operator
Safety
Responsibilities
No.
Operator
Responsibilities
1
Use proper eye, foot and hearing protection
2
Follow training provided by your company
3
Check before operating the unit:
•
Lights
•
E-stops
•
Hood Latches
•
Brakes
•
Parking Brake
•
Steering
•
Horn
•
Tires
•
Conveyor belt for damaged or raised hooks.
NOTE:
Do not operate unit if any of these items are defective
4
Keep hands and feet away from rotating parts and tires.
5
Wear secure clothing.
6
Bring belt loader to a complete halt stop, move shifter to neutral, and set parking brake before
dismounting.
7
Use seat belts at all times when belt loader is in motion.
8
Do not shift transmission into gear with engine above idle speed. Keep foot off accelerator
when shifting.
9
Bring belt loader to a complete stop before shifting from reverse to drive or from drive to
reverse.
10
Ensure the path is clear behind the unit prior to driving in reverse direction.
•
Check local station rules and, if allowed, blow horn before reversing
•
If not permitted, follow station rules for alerting other personnel prior to backing up
11
Use caution when in congested areas and around blind corners and rows of carts. Be alert for
other equipment and personnel.
12
Never operate at speeds inconsistent with operating conditions. Limit speed to allow adequate
time for braking in an emergency.
13
Do not allow the belt loader to be pushed by other equipment or use the belt loader to push
other equipment. Use proper towing equipment.
14
Do not tamper with engine.
15
Do not use the belt loader as a hoist for personnel. Use proper equipment for personnel.
16
Do not walk on fenders when icy or wet.
17
Walk ONLY on the conveyor and not on the painted frame. The painted frame is slippery when
wet.
Property
of
American
Airlines
