89
4.10.8 AUTO:EDIT:ADD
Set
Query
Description
Add the selected MANU test to the current AUTO number.
Syntax
AUTO:EDIT:ADD <NR1>
Parameter/
<NR1>
1~100
Example
AUTO:EDIT:ADD 7
Adds MANU-007 to the current AUTO number. I.e.,
A CW = 0 .
0 0 k
1
O V E
M
W A P
S
K I P
S
D E L
E
M
A U O
T
N A
_
7
A U T O = 0 0 5 - 0 0
M A N U _ N M E
A
V H
# 0 1 : 0 1 0
# 0 2 : 0 0 1
# 0 3 : 0 0 3
# 0 4 : 0 0 4
# 0 5 :
0 0 7
# 0 6 :
# 0 7 :
# 0 8 :
# 0 9 :
# 1 0 :
# 1 1 :
# 1 2 :
# 1 3 :
# 1 4 :
# 1 5 :
# 1 6 :
MANU test added to
last step
1 . 0 0 m A
E
S
= 0
T
_
I
4.10.9 TESTok:RETurn
Set
Query
Description
Allows “OK” to be displayed on the remote terminal when a
test has stopped (PASS/FAIL or STOP). This applies for
MANU and AUTO mode.
By default, TESTok:RETurn is set to OFF.
Syntax
Query Syntax
TESTok:RETurn {ON|OFF}
TESTok:RETurn?
Parameter/ Return
parameter
ON
Enables the “OK” message to be displayed.
OFF
Disables the message
Example
TEST:RET OFF
Disables the message.
4.11 Common Commands
4.11.1 *CLS
Set
Description
The *CLS command clears the internal registers.
Syntax
*CLS
4.11.2 *IDN
Query
Description
Queries the model number, serial number, and firmware
version of the tester.
Query Syntax
*IDN?
Return parameter <string> Returns the instrument identification as a string in
the following format:
STW-9901, XXXXXXXXXXXX, V1.00
(Model / Serial number / version)