TEXIO FGX-2220, Инструкция по эксплуатации

Страница: 97 / 229

84
6.
Use the selector keys and scroll
wheel or number pad to enter
period time.
0
/
3 2 1
4
7 8
5
9
6
7.
Press F1~F4 to choose the delay
time unit.
nSEC
F1
~
SEC
F4
Range Delay time 0s~655350nS
Default 0s
4-7-10. Burst Trigger Output
The Trig Out terminal on the rear panel can be used for burst or sweep modes to
output a rising edge TTL compatible trigger signal. By default the trigger signal is
rising edge. The trigger signal is output at the start of each burst.
Panel Operation 1.
Press the Burst key.
Burst
2.
Press F1 (N Cycle).
N Cycle F1
3.
Press F5 (TRIG set).
TRIG set F5
4.
Press F5 (TRIG out).
TRIG out F5
5.
Press F3 (ON/OFF) to toggle
Trigger out ON/OFF.
ON/OFF F3
6.
Select F1 (Rise) or F2 (Fall) edge
trigger.
Rise
F1
~
Fall
F2
Note
When the internal trigger is selected, a square wave with
a 50% duty cycle is output at the beginning of each burst.
Trig Out cannot be used with manual triggering and will
be disabled if manual triggering is set.
For manual triggering, a pulse is output (>1us) from the
Trig Out connector at the start of each burst.