TEXIO FGX-2220, Инструкция по эксплуатации

Страница: 177 / 229

164
Query Syntax SOURce[1|2]:PM:STATe?
Return Parameter 0 Disabled (OFF)
1 Enabled (ON)
Example SOUR1:PM:STAT?
1
PM modulation is currently enabled.
8-12-3. SOURce[1|2]:PM:SOURce
Set
Query
Description Sets or queries the PM source as internal or external. Internal
is the default source.
Note If an external PM source is selected, the phase modulation is
controlled by the MOD INPUT terminal on the rear panel.
Syntax SOURce[1|2]:PM:SOURce {INTernal|EXTernal}
Example SOUR1:PM:SOUR EXT
Sets the PM source to external.
Query Syntax SOURce[1|2]:PM:SOURce?
Return Parameter INT Internal
EXT External
Example SOUR1:PM:SOUR?
INT
The PM source is set to internal.
8-12-4. SOURce[1|2]:PM:INTernal:FUNction
Set
Query
Description Sets the shape of the modulating waveform from sine,
square, triangle, upramp and dnramp. The default shape is
sine.
Note
Square and triangle waveforms have a 50% duty cycle.
Upramp and dnramp have a symmetry to 100% and 0%,
respectively. .
Syntax SOURce[1|2]:PM:INTernal:FUNction
{SINusoid|SQUare|TRIangle|UPRamp|DNRamp}