45
3-1-2. Autoset
Background
The Autoset function automatically configures the
panel settings to position the input signal to the
best viewing condition.
The DCS-9700 automatically configures the
following parameters.
•
Horizontal scale
•
Vertical scale
•
Trigger source channel
There are two operating modes for the Autoset
function: Fit Screen Mode and AC Priority Mode.
Fit Screen Mode will fit the waveform to the best
scale, including any DC components (offset). AC
priority mode will scale the waveform to the screen
by removing any DC component.
Panel Operation 1. Connect the input signal to the
DCS-9700 and press the
Autoset
key.
Autoset
2. The waveform appears in the center of the
display.
Before
After
3. To undo Autoset, press
Undo
Autoset
from the bottom menu.
Change modes 1. Choose between
Fit Screen
Mode
and
AC Priority Mode
from
the bottom menu.
2. Press the
Autoset
key again to
use Autoset in the new mode.
Autoset
