Texi XYZ 2518, Руководство пользователя

Страница: 38 / 51

(1)Make sure that the value of the W axis is 0.00,and the cutting
edge of the knife must face the X+ direction,tighten the fixing ring
in the rightmost figure.
7.5 Kiss Cutting Tool (SP4,cut,Head1 ； SP2,Tcut,Head2)
(1)The exposed part of the tip is the same as or slightly less than
the thickness of the cutting material
(2)Make sure that the value of the W axis is 0.00,and the cutting
edge of the knife must face the X+ direction,tighten the fixing ring
in the rightmost figure.The position of the black knob above the
knife bar should be adjusted according to the cutting effect. If the
material needs to be cut through, the knob should be fully tightened.