INS467-9 26/47
5.7 Premier 412/816 V9.5 &V11.10 & Later,
Premier 832 2.5 &V4.10 & Later
Follow these instructions to learn devices to the system, once completed follow the
relevant section of the control panel manual to programme zones and user
attributes.
N
For V9.5 & V2.5 the number chosen for learning will determine the device slot
taken on the expander. This should always be started at 01. If started at 05 for
example, the next devices will go to 06 and you may run out of device slots.
N
For V16 panels all Ricochet devices including SmartKey
now take the next available slot.
Option Switch Settings
For this version of firmware all option switches 1,2 & 4 should be OFF.
Expander Settings
The expander should be set to address 1.
Detectors are assigned to zones as follows:
Select engineer’s mode by entering the engineer code followed by
1.
