Texecom PREMIER 168, Руководство по установке

Страница: 128 / 152

Engineer Utilities Premier Elite Series Installation Manual
128 INS176-15
5.9 Engineer Utilities
View Event Log
E o elec:
Enginee Uils
Enginee Uils
ie Een og
 
:84 /3
ode  aid
:84 /3
=Een =la
3=andaoy og
ode  aid
ea: 
ode  John
:84 /3
ode  aid
ea: 
y
y
1

C
A
P
N
The control panel has three Event Logs, which are time and date
stamped. The first log which is a system log, records all events that
occur on the system, i.e. Users entering their codes to arm or disarm
areas, alarm events, failures to arm etc.
The second log which is an alarm log, only records alarm events that
occur on the system.
The third log is the Mandatory Event log which records only events
defined as ‘mandatory’ by EN50131 .
The System Log records the last 500 ( 48 ), 1000 ( 88 ) or 2000 ( 168 )
events.
The Alarm Log records the last 32 alarm events.
The Mandatory Log records the last 500 mandatory events.
Event Log Hotkeys
When viewing the system log there are 9 hotkeys available. These
hotkeys allow certain events to be found easier without the need for
searching.
The following hotkeys are available:
1
= Priority Alarms (PA, Fire etc.)
2
= Normal Alarms (Guard, 24hr, Entry/Exit etc.)
3
= Opens and Closings (Arm, Disarm etc.)
4
= Omits and Reinstates (Zone Omits etc.)
5
= Maintenance (System Tests, Engineer Program etc.)
6 = Tampers (Zone, Bell, Aux etc.)
7
= Test Calls (Communicator Active, successful etc.)
8
= Entry/Exit (Entry and Exit Procedures)
0
= User Codes (User codes being used)