Texas GS 1680 Li, Руководство пользователя, Страница: 12 / 20

12
7. Clothing
When using the machine, wear tight-fitting work clothes,
strong working gloves, safety goggles, helmet and
boots with non-skid soles
8. Tips and advices
Follow these advices to get a better working result:
1. A fully charged battery have more power than a
half-empty battery when it comes to cutting big
branches.
2. Keep the pruner in a perpendicular position from
the branch to getter a cleaner cut. If the pruner is
tilted a little bit to the side, it will be more difficult to
cut properly.
3. Be careful not to hold the fingers, where the pruner
is cutting. Keep good distance between hands and
the blade of the pruner.
4. The normal cutting capacity for the pruner is:
Soft wood: Max Ø 25 mm
Hard wood: Max Ø 20 mm
9. Maintenance
Before any service and maintenance is done,
the power must be disconnected, it means the
battery removed from the tool.
•
Remove the battery before you clean and store the
machine.
•
For obtaining the best cutting results the knives
must be cleaned and oiled regularly. Remove dirt
with a soft brush and oil lightly.
•
Pour some drops of oil in the lubrication hole on the
blade (Fig. 6) 1-2 times per year and before winter
storage. Use the included oil.
•
Clean the housing and other parts with a mild
cleanser and a moist cloth. Never use aggressive
cleansers or solvents.
•
Prevent water from getting into the machine.
Replacement of blade. See Fig. 7
The moveable blade (1) can be replaced. Loosen and
remove the nut with the included wrench. Remove the
the bolt and the blade.
To fit a new blade, insert the blade in a 45
o
degree
angle, until the teeth match the gearbox. Adjust the
angle of blade so both blade holes are aligned. Mount
the bolt, washer and nut and tighten again.
Lubricate the blade with oil.
New blade has art. no. 451566
10. Storage
Store the pruner dry and unavailable for children. Keep
the blade lubricated. Use the protection cover for blade
when the machine is stored.
11. Specifications
Model GS 1680 Li
Battery type Lithium Ion
Battery capacity 16.8V / 2 Ah
Charging time 60-90 min
Voltage (charger) 220-240V - 50-60Hz
Branch thinckness Max Ø 25 mm
Net weight (w/o battery) 0.9 kg
Net weight (with battery) 1.1 kg
12. Warranty terms and conditions
The warranty period is 2 years for private end users in
EU countries. Products sold for commercial use, only
have a warranty period of 1 year.
The warranty covers material and/or fabrication faults.
Restrictions and requirements
Normal wear and replacement of wearing parts are
NOT covered by the warranty.
Wearing parts, which are NOT covered for more than
12 months:
•
Blade
•
Blade tip protector
•
Battery: If the battery is not stored correct (frost-
free and recharged every 3 months), the durability
is only guaranteed for 6 months.
The warranty does NOT cover damages/faults
caused by:
•
Lack of service and maintenance
•
Structural changes
•
Exposure to unusual external conditions
•
If the machine has been improperly used or
overloaded
•
Use of unoriginal spare parts.
•
Other conditions where Texas cannot be held
responsible.
Whether a case is a warranty claim or not is
determined in each case by an authorized service
center. Your receipt is your warranty note, why it
should always be kept safe.
REMEMBER: The purchase of spare parts as well as
any request for warranty repair, art. number (e.g.
900631XX), year and serial number should always be
informed.
* We reserve the right to change the conditions and
accept no liability for any misprints.