Texas Instruments TravelMate 4000M Скачать руководство пользователя страница 195

Страница: 195 / 295

Using the AC Ada pt er

The AC Adapter - Charges the internal Battery Pack and
operates the computer on AC power whether or not a
Battery Pack is installed

Caution: Use only the AC Adapter supplied with your
computer. Another adapter can damage your computer.

To connect the AC Adapter, complete the following steps:

Set the power switch to the off (

) position, or press

STANDBY

to put the computer into standby mode.

. Connect the female connector of the AC cord to the

inlet on the AC Adapter.

Hold the round connector from the AC Adapter and press

it into the matching jack on the rear panel of the
computer.

Plug the male end of the AC cord into a grounded wall

receptacle of the correct voltage.

If you plan to use other external devices with your unit,
connect the device to the computer before setting the
computer power switch to the on (

) position.

AC Adapter - Notebook

Using the AC Adapter

TravelMate Options

11-9

Содержание TravelMate 4000M








































































































































































































































































































Результаты поиска

Содержание TravelMate 4000M

Отзывы:

Texas Instruments TravelMate 4000M, Руководство пользователя, Страница: 195 / 295

Результаты поиска

Содержание TravelMate 4000M

Отзывы: