Texas Instruments TravelMate 4000M, Руководство пользователя

Страница: 128 / 295

❑
If you want to execute an
MS-DOS
command, pressing
C causes
LFM
to prompt at the bottom of the screen
DOS Command: [ ]
where you can type any
MS-DOS
command and press
Enter to execute.
F9 Go Key
Pressing F9 at the
LFM
main menu causes
LFM
to load and
execute programs based on the file’s extension. For
example, if you want to execute the
MS-DOS EDIT
utility on a
particular file, move the highlight to the
EDIT.COM
line
under the
DOS
directory listing and press F9 . Depending on
how you have set up your
LFM
Execute Commands item in
the
F10
LFM
Setup Commands menu,
LFM
may prompt you
at the bottom of the screen
Press ESC to cancel, any other key to execute:
Press any key except ESC . Depending on how you have set
up your
F10
LFM
Setup Commands menu,
LFM
then may
prompt:
Parameters: [ ]
At this prompt you can type the pathname of the file you
want to edit and press
ENTER
(or, if you are executing
another type of file that requires no parameters, press
ENTER to start execution). In the example, the
MS-DOS EDIT
screen would appear.
When you exit the executable program,
LFM
reloads and
displays its main menu.
LFM uses extended/expanded memory for itself when you
use the Go function, reserving all but about 8 KB for the
program. If no extended/expanded memory is available,
LFM
uses about 130 KB of standard base memory.
Function Key Commands
Laptop File Manager 7-11