manualshive.com logo in svg

Texas Instruments TravelMate 2000, Руководство пользователя


Поделиться
Скачать
background image

Guidelines for Installing Applications

Your TravelMate 2000 is fully compatible with IBM AT computers - All application programs written to
execute on AT computers will execute on the TravelMate 2000, and you can install the programs in much the
same way on the TravelMate 2000.  However, like most computers, you must consider the exceptions to the
installation process before you install programs into the TravelMate 2000.

Installing Applications Without the
Floppy Drive Option

If your TravelMate 2000 is not equipped with the floppy drive option, you can use the furnished LapLink file
transfer and device driver utility to install or copy a program by using another IBM AT-compatible computer.

Note:

Before copying any commercial software currently in use on another computer, read the License Agreement and

copyright protections that apply to that product.  Many agreements limit the use of an application program to
one owner, or even to one CPU-based system.  If you are already using the software on an existing system,
you may be prohibited from also running it on another computer.  In other cases, you may have to completely
remove the software from the current system before you can use it on another computer.  It is your
responsibility to ensure compliance with the terms and conditions pertaining to any software products you
plan to use with the LapLink feature.  Texas Instruments assumes no responsibility for the illegal or
unauthorized use of proprietary software products on Texas Instruments TravelMate computers.

Application Programs 5-3

Содержание TravelMate 2000

















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TravelMate 2000

IBM ThinkPad 760E Instruction Manual preview
ThinkPad 760E
Бренд: IBM Страницы: 331
Monster HUMA H5 V2.1 User Manual preview
HUMA H5 V2.1
Бренд: Monster Страницы: 74
Sabio SD-KN1 Assembly Manual preview
SD-KN1
Бренд: Sabio Страницы: 11
rgs Education Chromebook Getting Started Manual preview
Education Chromebook
Бренд: rgs Страницы: 12
Packard Bell EasyNote TE69KB User Manual preview
EasyNote TE69KB
Бренд: Packard Bell Страницы: 120
Acer TravelMate 2440 Series Manuel D'Utilisation preview
TravelMate 2440 Series
Бренд: Acer Страницы: 91
Acer TravelMate 2440 Series Guía Del Usuario preview
TravelMate 2440 Series
Бренд: Acer Страницы: 90
Acer 9410-2829 - Aspire (French) Manuel D'Utilisation preview
9410-2829 - Aspire
Бренд: Acer Страницы: 108
Acer 5330 2339 - Aspire - Celeron 2 GHz Quick Manual preview
5330 2339 - Aspire - Celeron 2 GHz
Бренд: Acer Страницы: 13
Acer 5810TZ-4274 - Aspire Quick Manual preview
5810TZ-4274 - Aspire
Бренд: Acer Страницы: 13
Acer 7265D2 Regulatory Information preview
7265D2
Бренд: Acer Страницы: 34
Acer 5738 6969 - Aspire - Core 2 Duo 2.2 GHz Quick Manual preview
5738 6969 - Aspire - Core 2 Duo 2.2 GHz
Бренд: Acer Страницы: 13
Acer 6493-6495 - TravelMate - Core 2 Duo 2.4 GHz Quick Manual preview
6493-6495 - TravelMate - Core 2 Duo 2.4 GHz
Бренд: Acer Страницы: 15
Acer 6293-6640 - TravelMate Quick Manual preview
6293-6640 - TravelMate
Бренд: Acer Страницы: 14
Acer 5735Z PMD T3400 (Danish) Datasheet preview
5735Z PMD T3400
Бренд: Acer Страницы: 6
Acer 6593-6325 - TravelMate - Core 2 Duo 2.53 GHz Quick Manual preview
6593-6325 - TravelMate - Core 2 Duo 2.53 GHz
Бренд: Acer Страницы: 14
Acer 5542-1462 Quick Manual preview
5542-1462
Бренд: Acer Страницы: 12
Acer 5100-5033 - Aspire - Turion 64 X2 1.6 GHz Service Manual preview
5100-5033 - Aspire - Turion 64 X2 1.6 GHz
Бренд: Acer Страницы: 112

Бренды по названию

Популярные бренды

Загрузить еще бренды