manualshive.com logo in svg

Texas Instruments TravelMate 2000, Руководство пользователя

Поделиться
Скачать
Texas Instruments TravelMate 2000 Скачать руководство пользователя страница 105

3.5-inch Floppy Drive Unit

4.

Turn the two wheel screws on the floppy drive unit clockwise to secure the floppy drive
unit to the computer.

Note:

Do not transport the TravelMate 2000 when the Floppy Drive Unit is attached.

Using the optional 3.5-inch Floppy Drive Unit enables you to add a 5.25-inch drive (not offered by Texas
Instruments).  The 5.25-inch drive connects to the 3.5-inch Floppy Drive Unit through a port on the rear panel
of the 3.5-inch Floppy Drive Unit casing.  You also can use an external keyboard when the 3.5-inch floppy
drive unit is attached.

For directions on using your 5.25-inch drive, see the manual furnished with the 5.25-inch drive.

3.5-inch Floppies

The floppy drive unit uses 3.5-inch 720 K byte (2DD) or 1.44 M byte (2HD) floppy diskettes.  A floppy is a
magnetic storage medium that holds data created on a computer.  Once data is stored on a floppy, it can be re-
used whenever necessary or replaced when no longer needed.

6-6 TravelMate 2000 Options

Содержание TravelMate 2000

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды