www.ti.com
Setup
Figure 6. GPIO View
The INTERRUPT control window allows the user to configure and mask interrupts.
In the default setup, all interrupts are masked.
If an event is masked, it is ignored and no interrupt is generated. If an event is not masked, an interrupt is
generated based on that event.
If any interrupt is pending, the INT pin is driven low. In the lower right corner of the window, all
INTERRUPT-related User Registers are displayed.
See the TPS65720 data sheet for detailed description on these registers.
11
SLVU324 – March 2010
TPS65720EVM
Copyright © 2010, Texas Instruments Incorporated
