Texas Instruments TPS65270, Руководство пользователя

Страница: 7 / 16

5.2 Jumpers
Table 5-1. Jumpers
JUMPER
NO.
FUNCTION PLACEMENT COMMENT
JP1 BUCK1 enable (EN1)
Connect EN1 to GND to disable V
OUT1
, connect
EN1 to V
IN
to enable V
OUT1
;
Leave open to enable V
OUT1
JP2 BUCK2 enable (EN2)
Connect EN2 to GND to disable V
OUT2
, connect
EN2 to V
IN
to enable V
OUT2
;
Leave open to enable V
OUT2
JP3 Low Power Mode (LOW_P)
Connect LOW_P to GND to enter forced PWM
mode; Connect LOW_P to V
CC
to enter automatic
PSM/PWM mode
Cannot leave open
www.ti.com Bench Test Setup Conditions
SLVU474C – AUGUST 2011 – REVISED MAY 2021
Submit Document Feedback
TPS65270 Buck Converter Evaluation Module User's Guide 7
Copyright © 2021 Texas Instruments Incorporated