Texas Instruments TPS65235-1, Руководство пользователя

Страница: 9 / 19

Basic Information
About TPS65235-1
Register Map
Status for USB
Adapter Connection
Main Control Panel
www.ti.com
Software Installation
9 SLVUAZ0 – November 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Evaluation Module for the TPS65235-1 LNB Voltage Regulator With I
2
C
Interface for DiSEqC2.x Application
5 Software Installation
If installing from the TI Web site, visit SLVC651 .
NOTE: This installation page is best viewed with Microsoft Internet Explorer
®
browser (it may not
work correctly with other browsers).
1. Click on the install button; the PC should display a security warning and ask if you want to install this
application. Select Install to proceed.
2. To run the software after installation, either use the desktop icon, which is created by the installer if the
user agrees to creating a desktop icon, or go to Start → All programs → Texas Instruments →
TPS65235-1.
At start-up, the software first checks the firmware version of the USB-to-GPIO adapter box. If an incorrect
firmware version is installed, the software automatically searches the Internet (if connected) for updates. If
a new update is available, the software notifies the user of the update then downloads and installs the
software. Note that after the firmware is updated, the user must disconnect and then reconnect the USB
cable between the adapter and PC, as instructed during the install process. The host PC software also
automatically searches on the Internet (if connected) for updates. If a new update is available, the
software notifies the user of the update and downloads and installs it. During future use of the software,
you are prompted to install a new version if one becomes available on the Web.
NOTE: VERISIGN
®
Code Signing is used to prevent any malicious code from changing this
application. If at any time in the future the binaries are modified, the code will no longer
attempt to run.
6 Software Operation
This section provides descriptions of the EVM software.
The supplied software is used to communicate with the TPS65235-1EVM. Click on the icon on the host
computer to start the software. The software first displays the home page for the user interface. Two
entrances are available for the expert user or beginner.
Figure 7. Home Page for GUI Interface