Introduction
14
TPS65083xEVM GND Layer (X-Ray View From Top)
................................................................
15
TPS65083xEVM Signal 1 (X-Ray View From Top)
....................................................................
16
TPS65083xEVM Multi 1 (X-Ray View From Top)
......................................................................
17
TPS65083xEVM Multi 2 (X-Ray View From Top)
......................................................................
18
TPS65083xVM Signal 2 (X-Ray View From Top)
......................................................................
19
TPS65083xEVM Power Layer (X-Ray View From Top)
..............................................................
20
TPS65083xEVM Bottom Copper (X-Ray View)
........................................................................
List of Tables
1
TPS650830EVM Electrical and Performance Specifications
..........................................................
2
Output Rail Headers
.......................................................................................................
3
HPA515B Bill of Materials
.................................................................................................
1
Introduction
1.3
Requirements
To operate the EVM for basic evaluation
1.1
Features
purposes a PC, the EVM software, and power
•
4 DCAP2™ Controllers
supply are needed in addition to basic a
voltmeter or Digital Multimeter, DMM.
•
1 Converter, 2-MHz Switching Frequency
•
DDR Termination LDO, ±1 A
1.3.1
Host Computer
•
Wide Vin Range, 5.4 V – 21 V
A personal computer (PC) with a USB port is
•
Dynamic Voltage Scaling, via I2C and/or
required to operate this EVM. The TPS65083x
Hardware Signal
software runs on the PC and communicates
•
Output voltage adjustable via I2C interface
with the EVM via the PC's USB port and the
USB-to-GPIO interface.
•
Power Path Management for 2 Batteries and
1 Adaptor
PC Requirements :
•
8 Power Good Comparators and Sequence
•
Microsoft
®
Windows
®
7 operating system
Logic for External DCDCs, LDOs and Load
•
USB port
Switches.
•
Minimum of 30MB of free hard-disk space
•
2 Level Shifters
(100MB recommended)
•
Power-Button Logic Supported with
•
Minimum of 256MB of RAM
Programable Response Time and Counter
Reporting
1.3.2
Software
•
RTC Backup Battery Selector with 3.1-V
LDO Output
Download and install the TPS65083xEVM GUI
•
Board Temperature Monitoring System
on a PC to access the I2C registers.
•
1-Hz Wake EC Clock
1.3.3
Power Supply Requirements
1.2
Applications
A DC power supply capable of delivering up to
21 V, 9 A, and 50 W is required to operate this
•
Notebook Computing
EVM to its max power outputs.
•
Tablets
•
Human Machine Interface
•
Infotainment Systems
•
FPGA System Power
Microsoft, Windows are registered trademarks of Microsoft Corporation.
2
TPS650830EVM-095
SLVUAD6 – December 2014
Copyright © 2014, Texas Instruments Incorporated