1 Introduction
The Texas Instruments TPS272C45EVM is an evaluation module that is used to demonstrate and showcase
all of the features of the underlying TPS272C45 industrial high side switch. This evaluation board provides a
seamless way to connect a set of power supplies to the inputs of the TPS272C45, connect loads to the output
channels, and switch on and off the device using the control pins of the chip itself. An on-board 3.3-V LDO
is included on the EVM to simplify controlling signals to the TPS272C45 and easily assert and deassert logic
signals by the use of a set of external hardware jumpers. Additionally this EVM includes BoosterPack headers
allowing the user to easily connect the TPS272C45 high side switch to an underlying microcontroller and write
software to control and configure the device.
Features of the TPS272C45EVM include:
• Multiplexed current limit configuration on ILIM1
• BoosterPack headers allowing power switch to be controlled by external microcontroller
• On-board 3.3-V LDO allowing for control signals to be manipulated by set of jumpers
• Ideal board layout and copper area for thermal performance
• Ability to support versions A, B, C, and D of the TPS272C45
• Optional footprint to populate external inductive clamping diodes (version C of TPS272C45)
• Optional footprint to populate TVS diode for Vdd input (version A of TPS272C45)
Introduction
2
TPS272C45 Evaluation Module
SLVUBV4A – DECEMBER 2020 – REVISED DECEMBER 2021
Copyright © 2021 Texas Instruments Incorporated
