1 About this Manual
This user's guide describes the TPS25762/72-Q1 EVM. The guide consists of an introduction, setup instructions,
the EVM schematic, board layouts, component views, internal power (PWR) and ground (GND) plane layouts,
and a bill of materials (BOM).
2 Information About Cautions and Warnings
ATTENTION
STATIC SENSITIVE DEVICES
HANDLE ONLY AT
STATIC SAFE WORK STATIONS
CAUTION
This EVM contains components that can potentially be damaged by electrostatic discharge. Always
transport and store the EVM in the supplied ESD bag when not in use. Handle using an antistatic
wristband. Operate on an antistatic work surface. For more information on proper handling, see
.
3 Items Required for Operation
The following items are required to use the TPS25762/72-Q1 EVM:
• TPS25762/72-Q1 datasheet
• TPS25762/72-Q1 EVM
•
TPS25762/72-Q1 Configuration Tool
• 5.5V~18V DC power supply
• Passive USB Type-C
®
E-Marker cables
• USB Type-A to USB Micro-B cable
• Notebook with USB 2.0 capabilities
4 Introduction
The TPS25762/72-Q1 is a fully integrated USB Type-C
®
Power Delivery (PD) solution with integrated buck-boost
converter for using in automotive single and dual USB port applications including: charging only and charging
with USB 2.0 or 3.0 data. It is comprised of an ARM
®
Cortex
®
-M0; one integrated Buck-Boost converter with
4 power switches; USB port controller with Type-C cable plug and orientation detection; USB Battery Charging
Specification Version 1.2 (BC1.2) detection; USB PD PHYs; integrated Short to VBUS and VBAT Protection.
Firmware updates are supported using the internal USB Endpoint on Port A.
This user's guide describes how the TPS25762/72-Q1 EVM can be used to test PD functions as well as
USB Data. The EVM is customizable through the
TPS2577x/6x-Q1 Configuration Tool
. Additionally, the EVM
is equipped with Aardvark connector to I
2
C interfaces, USB micro-B interface and USB2ANY interface for
debugging and development.
About this Manual
SLVUC03 – NOVEMBER 2022
TPS25762/72-Q1 EVM User's Guide
3
Copyright © 2022 Texas Instruments Incorporated