Texas Instruments TPS2120EVM, Руководство пользователя

Страница: 4 / 21

General Configurations
www.ti.com
4 SLVUBD2A – September 2018 – Revised January 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
TPS212x Evaluation Module
Table 4. TPS2121 Jumper Description (continued)
Input Connector Label Description
VOUT
J17, J18 100 µF 100-µF output capacitor
J19 100 µF 100-µF output capacitor
J19 220 µF 220-µF output capacitor
J16 -
Female header for custom output resistance,
capacitance
J20 10 Ω 10- Ω external resistor
JP2 ST
Sets adjustable hysteresis
Position 1-2 sets ST, 2-3 disables (GND)
J22, J23 SS Soft-start control
JP3 ILIM
Current limit control
Position 1-2 position sets 4.5 A maximum
Position 2-3 sets 2 A maximum
No jumper sets 1.5 A maximum
2.2 TPS2120 Configurations
This section provides an overview of the TPS212x evaluation board input and output jumpers. Table 2
describes the input and output connectors on the EVM. Table 3 describes the different test points and
functionality, while Table 4 describes the jumper functionality and configurations.
Table 5. TPS2120 Input and Output Connector Functionality
Input Connector Label Description
VIN1
J10 VIN1 + , GND - Input block header for VIN1
TP7 VIN1 Input test point for VIN1
TP5 VIN1_SNS Input sense connector for VIN1
VIN2
J17 VIN2 + , GND - Input block header for VIN2
TP11 VIN2 Input test point for VIN2
TP10 VIN2_SNS Input sense connector for VIN2
VOUT
J11 VOUT +, GND - Output block header for VOUT
TP8 VOUT Output test point for VOUT
TP6 VOUT_SNS Output sense connector for VOUT
GND
TP12, TP13, TP14, TP15,
TP16, TP17, TP18, TP19
GND Test point for GND
Table 6. TPS2120 Test Points Description
Input Connector Label Description
VIN1
TP1 OV1 Overvoltage test point for VIN1
TP3 PR1 Priority test point for VIN1
VIN2
TP2 OV2 Overvoltage test point for VIN2
TP9 SEL Select test point
VOUT TP4 ST Status test point