2.1.4
Power Up
www.ti.com
Operation
Table 1. Gain Settings
GAIN1
(1)
GAIN0
(1)
Amplifier Gain (dB)
0
0
10
0
1
12
1
0
15.6
1
1
21.6
(1)
OFF = Jumper REMOVED; ON = Jumper INSTALLED
1. Verify correct voltage and input polarity, and turn on the external power supplies.
The EVM should begin operation.
2. Adjust the input signal.
3. Adjust the control inputs to the desired settings.
4. Adjust the amplifier gain by installing/removing the gain jumpers, GAIN0 and GAIN1.
SLOU240 – August 2007
List of Tables
3