Texas Instruments TMS320C54x, Руководство пользователя

Страница: 344 / 469

Hex Conversion Utility Error Messages
10-44
10.12 Hex Conversion Utility Error Messages
section mapped to reserved memory message
Description A section or a boot-loader table is mapped into a reserved
memory area listed in the processor memory map.
Action Correct the section or boot-loader address. Refer to the
TMS320C54x DSP Reference Set for valid memory locations.
sections overlapping
Description Two or more COFF section load addresses overlap or a boot
table address overlaps another section.
Action This problem may be caused by an incorrect translation from
load address to hex output file address that is performed by the
hex conversion utility when memory width is less than data
width. See Section 10.4,
Understanding Memory Widths, on
page 10-9 and Section 10.10, Controlling the ROM Device
Address, on page 10-34.
unconfigured memory error
Description This error could have one of two causes:
J
The COFF file contains a section whose load address falls
outside the memory range defined in the ROMS directive.
J
The boot-loader table address is not within the memory
range defined by the ROMS directive.
Action Correct the ROM range as defined by the ROMS directive to
cover the memory range as needed, or modify the section load
address or boot-loader table address. Remember that if the
ROMS directive is not used, the memory range defaults to the
entire processor address space. For this reason, removing the
ROMS directive could also be a workaround.